Powder coating booths are usually designed to concentrate the powder coating fumes within the booth. This makes it easy to maintain a clean environment for workers, customers, or anyone else nearby. A good powder coating booth should have several elements:
Air Filtration System
Inexpensive booths will come with a basic system with a couple of filters, decreasing the number of particles in the air but not removing them completely. As soon as you invest more money to add to your booth’s filtration system, you can significantly reduce the level of airborne particles and provide much cleaner air.
Completely Enclosed
When you spray powder paint in an open booth, particles will eventually settle out and stick on things outside your booth like tables, floors, workbenches, and even other people who might be in your area. That’s why your booth must be fully enclosed and static-free, so the particles go to the filters.
Filters
Filtration systems on booths are often neglected; however, making sure your booth has a filter is essential for limiting airborne particles in the air. To ensure you get the best filtration possible, look into getting more than one filter to help keep down all that powder coating dust in the air.
High-Quality Fans
To provide correct ventilation and airflow inside your Powder Coating Booth, it will be necessary to have some good airflow fans running at all times during operation. These should move around by incorporating a lot of air depending on how large your booth is and what size oven you are attempting to match. A high-quality blower motor is required to get sufficient pressure to create airflow across all filters in your booth.
A Temperature Sensor & Alarm
Most oven manufacturers recommend that if you spray powder paint inside of their oven, the temperature should not exceed 500 degrees Fahrenheit at any time during operation, or else you risk damaging their machine. Therefore, make sure that your booth comes equipped with a temperature sensor and alarm. If the temperatures get too high inside, it can automatically shut off for safety purposes.
A Ground Fault Circuit Interrupter Outlet
A ground fault circuit interrupter outlet is required in any area where water may contact electrical components. It reduces the risk of electrocution when working around wet areas or spraying powder coating paint in your booth. As soon as the water comes into contact with an electrical component, the GFCI will cut off the power before you can get electrocuted.
A Blower Motor Power Switch
You might notice that most booth blower motors come with two separate cords coming out of them; one is for powering the blower motor, and one is for turning it on and off. Make sure your booth comes with a switch to turn this powerful fan on and off so that it doesn’t run any time. You are not spraying powder coating paint on it; this will help save energy costs.
Powder coating booths may be simple machines, but they provide an essential service that can make all the difference between whether or not your company works productively at all. Be sure to make a smart investment by purchasing a booth with good filtration, airflow, and other innovative accessories you can’t find in an economical booth.
For more articles visit this website
